Bibliografia
Krasowska K et al - Environmental Degradability of Polyurethanes - nov 2015 - https://www.intechopen.com/books/thermoplastic-elastomers-synthesis-and-applications/environmental-degradability-of-polyurethanes
Pereira Ailton - BASF - Agentes Expansores Ecológicos para Espumas Rígidas - FEIPUR - nov 2012.
Schauvliege K & Avezu M - Solvay - SOLKANE® 365 for Polyurethane Foam - FEIPUR - nov 2012.
Porto F - Bayer - O Poliuretano e a Economia de Energia - FEIPUR - nov 2012.
Porto F - Bayer - Polióis produzidos a partir de CO2 - FEIPUR - nov 2012.
MCassab - Tecnologias para homologação no INMETRO - FEIPUR - nov 2012
Helen Walter-Terrinoni - DuPont™ FEA-1100: Zero ODP, Low GWP, Non-Flammable Alternative for HCFC-141b - FEIPUR - nov 2010.
Biesen W. et al - Elastogran Gmb - Lupranol BALANCE – Eco-Efficiency-Analysis - UTECH Europe 2009.
Gower W & De Genova R.- Cargill Biobased Polyurethanes - New Polyols Based on High Renewable Content for the Production of High Resilience Flexible Slabstock Foams - UTECH Europe 2009.
Sunkara H. - DuPont™ Cerenol™: A Novel Renewably Sourced Ingredient for Polyurethanes - Polyurethanes 2009 Technical Conference.
Lorenz K. et al - Bayer MaterialScience - Natural Oil Polyols in Insulating Foams - UTECH Europe 2009.
Bauer S. et al - Óleo de rícino: uma fonte renovável de polióis com boas caracterísiticas de processamento - Plástico Industrial - ago 2008.
Yamaguchi K. et al - Como o formato da célula influencia as propriedades mecânicas do poliuretano - Plástico Industrial - jun 2008.
Austin A. – Global Overview of PU Industry, Utech 2006.
Wuestenenk J. & Bright D.A. - The Application of Halogen-Free Flame Retardants in Flexible Polyurethane Foam, Utech 2006.
Landry D.D. et all - Flame Retardants used in Polyurethane Foam, Utech 2006.
Klockemann K. & Bader M. - Best Technology for VOC, Utech 2006.
Felder G et all - Low Emission Amine Catalysis for Automotive Applications, Utech 2006.
Landers R. et all - New Cell Opening Strategies for TDI 80 Viscoelastic Foams by Additive Means, Utech 2006
Bright D. & Wuestenenk J. - Flame retardant solutions for Flexible Polyurethane Foams, Utech 2006.
Kurphy J - The Revolutionary New Bolwing Agent for Europe, Utech 2006.
Beaujean M - Methylal's use as a Blowing Agent for PU Foams, Utech 2006.
Enaux V et al - Trans-1,2-dichloroethylene in integral skin foams, Utech 2006.
Stirma U et al - Water Blown Polyisocyanurate Foams from Vegetable Oil Polyols, Utech 2006.
Ooi T et al - Palm Oil Based Polyol for Flexible PU Foam, Utech 2006.
Cameron P - Novel Technology for Polyester PU Shoe Soling with Excellent Hydrolysis Resistence, Utech 2006.
Prociak A- Rigid PU foams modified with vegetable oil-based polyols, Utech 2006.
Bauer S et al - Novel Polyols based on Renewable Resources, Utech 2006.
Santos F - Aditivos para poliuretanos, Feipur 2006
Birolim A - PU para Calçados: Inovações e Meio Ambiente, Feipur 2006
Grenn T - Sistemas PU para Indústria de Transporte, Feipur 2006
Grenn T - Sistemas PU para Indústria de Transporte, Feipur 2006
Sereda L - Superando os desafios do PU pliéster com baixa densidades, Feipur 2006
Krieger W - Retardantes de chama à base de fósforo, Feipur 2006
Stephan W & Jobst G - Advances in Non Fugitive Additives for Flexible Molded Applications, PU Latin America 2005.
Abe R & Altoé P - Challenges and Opportunities for Water Blown Rigid Foam in Insulation Applications, PU Latin America 2005.
Andrew G et al - Challenges Facing The Polyurethane Shoe Sole Industry, PU Latin America 2005.
Bayer Material Science - Efficient Foaming in Appliancesand OtherDiscontinuous Applications, PU Latin America 2005.
Bright D & Oliva A - Flame retardant solutions for Polyurethane Foams, PU Latin America 2005.
Negretti F - Low Resilience Foams with Reduced Odor in Viscoelastic Flexible Slabstock Foams, PU Latin America 2005.
Holanda C et al - New FR Silicone SurfactantNIAX* Silicone L-650, PU Latin America 2005.
Jinhuang W et al - trans-1,2-dichloroethylene As an Additive for HFC-134a Foam Systems, PU Latin America 2005.
Dow Poliuretanosl -VORANOL* VORACTIV* Benefícios de uma Nova Química, PU Latin America 2005.
Ashford - Potencial roles for HFC-based technologies in Europe, Utech 2005.
Kevin J K - An Introduction to Polyisocyanurate Technology with Aromatic Polyester Polyols, Feipur 2004
Austin A - Growth Opportunities in the Global PU Industry, Utech 2003.
Panitzsch T et al - Novel Delayed Action Catalysts for Shoe Sole and Micro Cellular Applications, Utech 2003.
Panitzsch T et al - Novel Delayed Action Catalysts for Shoe Sole and Micro Cellular Applications, Utech 2003.
Desnier M & Joele F - Low Fugitivity Catalysts for Slabstock Foams, Europur technical Meeting, 2003.
Panitzsch T. et all - Novel Delayed Action Catalysts for Shoe Sole and Micro Cellular Applications, Utech 2003.
Rogríguez J - Polyols Compatible With Non-Fugitive Amine Catalysts, Utech 2003.
Bulik M & Willmeroth G - New conveyor and mould handling systems offer production flexibility, Utech 2003.
Woods T et al -Elimination of Volatile Amine Catalysts in Flexible Slabstock Foams by Using Catalytically Active Polyols, Utech 2003.
Randall D., Lee S. et al. -The Polyurethanes Book, Huntsman Polyurethanes and John Willey & Sons, 2002.
Vilar W.D. - Química e Tecnologia dos Poliuretanos, 3ª ed., Vilar Consultoria, 2002.
Bellé, A. - Overwiew of the PU Business in South America, Utech PU Latin America, 2001
Simoniello, E. - Raw Material Supply - Current Present Situation and Future Prospects, Utech PU Latin America, 2001
Andrew, G.D. et all - New Susfatants for Flexible Slab, Utech PU Latin America, 2001
Holanda, C.N. & Lawler, L.F. - New Additives for Improved Propeties and Processing, Utech PU Latin America, 2001
Paupério, A & Santiago, R - Flexible Slab Foams Based on Dow Polyols and Flex Uniblock A - Variable Pressure Machine, Utech PU Latin America, 2001
Ellero, S et all - Novel Polyols Offer a Versatile Tool for Foam Hardness Control, Utech PU Latin America, 2001
Thies, W - Release Agent, Utech PU Latin America, 2001
Taverna, M - Foam & Film Technology, Utech PU Latin America, 2001
Eury, S & Wu, J - Blowing Agents for Rigid Polyurethane Foam, Utech PU Latin America, 2001
Recker, K - High Performance Polyurethane Elastomers, Utech PU Latin America, 2001
Andrew, G et all - Surfactant Tehcnolgy for Low Density Molded Microcellular and Flexible PU Systems, Utech PU Latin America, 2001
Berends J. – European Thermal Insulation Markets, Utech, 2000.
Hohl P. C. et al. – Additives for Pentane Lamination Rigid Foams, Utech, 2000.
Austin A. – An Overview of the CASE Market in Western Europe, Utech, 2000.
Santamaría J. et al. - Polymeric Polyester with High Hydrolytic Stability, Utech, 2000.
Takeyasu H. et al. – New Formulations of Alternatives Blowing Agent System in Appliances, Utech Asia, 1999.
Williams D. J. et al. – Next Generation Blowing Agents for Thermal Insulating Foams, Utech Asia, 1999.
Mansfield K F et al. – New Additives to Improve Dimensional Stability in Rigid Polyurethane Foam Systems, Utech Asia, 1999.
Starke J et al. – LFI-PUR A Process Gains Acceptance and Opens up New Possibilities, Utech Asia, 1999.
Rothe J. et al. – Additives for Improved Polyether Slabstock Foams, Utech, 1999.
Burkhart G et al. – Liquid Carbon Dioxide Foaming in Flexible Slabstock Foam Production, Utech Asia, 1999.
Willmeroth G. – Better Quality and Higher Productivity in the Production of Sandwich Panels, Utech Asia, 1999.
Okuzono S. et al. – New Tertiary Amine Catalysts for Sprayed Rigid Foams, Utech Asia, 1999.
Gier D. R. & Knaud P. – Crosslinker versus Styrene/Acrilonitrile Based Polymer Polyols, Utech Asia, 1999.
Frisch D. C. – Historical Developments of Polyurethanes, in 60 Years of Polyurethanes International Symposium, Detroit, 1998.
Clausius R - 60 Years of Polyurethanes – Still Going Strong, in 60 Years of Polyurethanes International Symposium, Detroit, 1998.
Andrews S. M. – Revolutionary New Stabilization Technology for Polyurethanes, in 60 Years of Polyurethanes International Symposium, Detroit, 1998.
Sommer K. H. et al. – Recent Progress in PU Elastomers, in 60 Years of Polyurethanes International Symposium, Detroit, 1998.
Chang W. L. – Effect of Crosslink Variation on Physical Properties of Polyurethanes, in 60 Years of Polyurethanes International Symposium, Detroit, 1998.
Jacobs P. et al. –Two-Component Waterborne Polyurethane Coatings, in 60 Years of Polyurethanes International Symposium, Detroit, 1998.
Rose R. – Advances in Flame Retarding Flexible Polyurethane Foam, in 60 Years of Polyurethanes International Symposium, Detroit, 1998.
Reinhard K – What’s new in PU/PIR Foams, The International PU China Conference, 1998.
Chinn H. – Polyurethane Foams, 1998 by the Chemical Economics Handbook – SRI International, 1998.
Vilar W.D. - Química e Tecnologia dos Poliuretanos, 2ª ed., Vilar Consultoria, 1998.
Herrington R. & Hock K. – Dow Polyurethanes Flexible Foams, 2ª Ed., Dow Chemical, 1997.
Rolando T. E. – Solvent-Free Adhesives, Rapra Review Reports, 1997
Demharter A. – Polyurethane Rigid Foam, a Proven High Performance Building Material, Polyurethane World Congress, 1997.
Seifert H. & Wiegmann W. – Technical Comparison of Various Blowing Agents with Different Polyurethanes Systems, Polyurethane World Congress, 1997.
Seneker S.D. et al. – New Polyether Polyols for Aqueous Polyurethanes Dispersions, Utech Asia, Rapra, 1997.
Fishback T.L. & Reichel C.J. – Low Unsaturation PPG Polyol Blends with PTMEG in Elastomers, Utech Asia, Rapra, 1997.
Sood R. et al. – Advances in Pure and Polymeric MDI Chemistry, Utech Asia, Rapra, 1997.
Julia J. & Lope J. – Environment-Friendly Solvent-Based TPU Adhesives, Utech Asia, Rapra, 1997.
Lee S. – The Position and Prospects for Polyurethanes in Footwear Applications in Asia-Pacific, Utech Asia, Rapra, 1997.
Gill W.A. et al. – High Performance Light-Weight PU Shoe Sole Material Based on New Polyether Polyols, Utech Asia, Rapra, 1997.
Brecht K. et al. – Outsoles made from Solid Polyurethane as an Advantageous Alternative do Rubber, Utech Asia, Rapra, 1997.
Maccari B. & Mussini S. – Water Blown Polyether Systems for the PU Footwear Industry, Utech Asia, Rapra, 1997.
Kometani H. et al. – Tertiary Amine Catalyst Systems for Shoe Sole Polyurethane Foam, Utech Asia, Rapra, 1997.
Dix L.R. et al. – Studies of Degradation in PVC by Amine Additives in Polyurethane Foam Backing – Catalyst in PU Foams, Rapra, 1997.
Taverna M. – Industrial Applications of Liquid Carbon Dioxide-blown Molded Foams, Utech Asia, Rapra, 1997.
Kim K.M. & La M.C. – Water Blown Integral Skin Foam with a Low Density, Utech Asia, Rapra, 1997.
Shin S.H. et al. – Recycling by Glycolysis and Its Effect on Foam Properties, Utech Asia, Rapra, 1997.
Roux J.D. et al. – What’s Going on the Area of Blowing Agents for PU Foams?, Utech Asia, Rapra, 1997.
Sikkorski M. & Bucholz T. – Improved Catalyst for Rigid Foams, Catalyst in PU Foams, Rapra, 1997.
Humbert H.H. et al. – Low-Odour Amine Blowing Catalysis in Flexible Polyether Foam, Catalyst in PU Foams, Rapra, 1997.
Wendel S. – Structural Influence on Performance of Urethane Catalysts for Flexible Molded and Slabstock Foams, Catalyst in PU Foams, Rapra, 1997.
Derderian E.J. et al. – Process Optimization in Molded Foam Through Catalysis, Catalyst in PU Foams, Rapra, 1997.
Kometani H. et al. – The Characteristic and Role of Tertiary Amine Catalysts for PU Foams, Catalyst in PU Foams, Rapra, 1997.
Mullender C.S. – Properties of Auxiliary Organo-Tin Catalysts in PU Foams, Catalyst in PU Foams, Rapra, 1997.
Muller L. – Catalysts and Surfactants for Flexible PU Molded Foams, Utech 96, Processing Workshop 4, Rapra, 1996.
Lidy W.A. – The PU Flexible Slabstock Foaming Process, Utech 96, Processing Workshop 3, Rapra, 1996.
Desnier M.C. – Catalysts and Surfactants for Flexible PU Slabstock Foams, Utech 96, Processing Workshop 3, Rapra, 1996.
Blackwell S.M. – Flexible Foam Machinery, Utech 96, Processing Workshop 3, Rapra, 1996.
Sommerfeld C.D. – PUR Rigid Foam Markets for Buildings, Utech 96, Processing Workshop 1, Rapra, 1996.
Esser W. – Chemistry and Physics of Rigid Foams for PUR Sandwich Panels, Utech 96, Processing Workshop 1, Rapra, 1996.
Oertel G. - Polyurethane Handbook, 2nd Edition, By Hanser Publishers, N.Y., 1994.
Vandichel J.C. – Chemistry and Physics of Flexible PU Foams, Utech 94, Processing Workshop 1, Rapra, 1994.
Muha K. – Catalysts and Surfactants for Flexible PU Foams, Utech 94, Processing Workshop 1, Rapra, 1994.
Cranshaw M.W. – Machinery for Flexible Slabstock Foams, Utech 94, Processing Workshop 1, Rapra, 1994.
Taverna M. – Machinery for Molded Flexible Foams, Utech 94, Processing Workshop 1, Rapra, 1994.
Prolingheuer E.C. – Chemistry & Physics of Elastomeric Polyurethanes, Utech 94, Processing Workshop 2, Rapra, 1994.
Seyffert H. – Catalysts, Surfactants and Release Agents for Elastomeric Microcellular Foams, Utech 94, Processing Workshop 2, Rapra, 1994.
Fuest R.W. – Cast PU Elastomers, Utech 94, Processing Workshop 2, Rapra, 1994.
Grünbauer H.J.M. – Chemistry and Physics of Rigid PU Foams, Utech 94, Processing Workshop 3, Rapra, 1994.
Fis J. – Catalysts and Surfactants for Rigid PU Foams, Utech 94, Processing Workshop 3, Rapra, 1994.
Bazzo W. – Foams for Refrigeration Applications, Utech 94, Processing Workshop 3, Rapra, 1994.
Cope B. & D’hondt L. – Lamination of Rigid Foams, Utech 94, Processing Workshop 3, Rapra, 1994.
Air Products – Engineering Properties of Castable PU Elastomers, 1994.
Lehrich F. - Thermoplastic PU Properties and Processing, Utech 94, Processing Workshop 2, Rapra, 1994.
Vilar W.D.: Química e Tecnologia dos Poliuretanos, 1ª ed., Pronor, S. Paulo, 1993.
Smith R.M.: SRI International, Supplement C, California, 1991.
Mano E.B.: Polímeros como Materiais de Engenharia, Ed. Edgard Blücher, 1991
Backus J.K.: Encyclopedia of Polymer Science and Engineering, vol. 13, Wiley – Interscience, N.Y., 1988.
Woods G.: Polyurethane Book, Polyurethanes and John Willey & Sons, 1987.
Oertel G.: Polyurethane Handbook, Chemistry – Raw Material – Processing – Application – Properties, Hanser Publishers, N.Y., 1985.